引導程序 - 不要jmp或正確加載第二個扇區

Question

我一直試圖做一個引導程序。在我得到它的一點，但現在它不再工作。當我運行它時，它會打印出一個A和一個B.所以這意味着它實際上做了讀取，但由於某種原因，當它跳轉時，它不會執行我放在USB驅動器第二個扇區的代碼。

我不知道我的地址或跳轉有問題嗎？

我包括放置在第二個扇區我的USB記憶

[bits 16] 
[org 0x7C00] 

jmp Start 

;%include "BIOS_Parameter_Block.inc" 
;%include "Extensions.inc" 
;%include "Print.inc" 

; Prepare Stack Segment 
;----------------------------------------------------------------- 
Start: 
xor ax, ax 
mov ds, ax 
mov es, ax 
mov fs, ax 
mov gs, ax 
mov ss, ax 

mov sp, 0x7C00    ; Move Stack into SP 
mov bp, sp     ; Store current Stack Base 

; Print Character to Make Sure Bootloader Has Reached this Point 
;----------------------------------------------------------------- 
mov ah, 0x0E    ; Print Character to Screen 
mov bh, 0x00    ; No Page Numbering 
mov bl, 0x07    ; White Text, Black Background 
mov al, 65     ; Print Letter A 
int 0x10 

; Check if INT0x13 Extentions are Supported 
;----------------------------------------------------------------- 
mov ah, 0x41    ; Set Function 0x41 
mov word bx, 0x55AA   
push dx      ; Save old Drive Identifier 
mov dl, 0x80    ; Load 'Active' ID Into dl 
int 0x13     ; Call Interupt 
jc short unsupported  ; If Extentions aren't Supported, Jump 
clc       ; Clear Carry Bit 

; Read from the device. 
;----------------------------------------------------------------- 
mov si, DAPS    ; Load DAPS Struct to DS:SI 
mov ah, 0x42    ; Read Functions (AL Ignored) 
mov dl, 0x80    ; Load 'Active' ID Into dl 
int 0x13 
jc short unsupported  ; If something goes wrong... 

mov ah, 0x0E    ; Print Character to Screen 
mov bh, 0x00    ; No Page Numbering 
mov bl, 0x07    ; White Text, Black Background 
mov al, 66     ; Print Letter B 
int 0x10 

; IT DOES PRINT THIS ABOVE 

jmp 0x0:0x7E00     ; Jump to main 

; Errors 
;----------------------------------------------------------------- 
unsupported: 
mov ah, 0x0E    ; Print Letter F, Gives Indication of Failure 
mov bh, 0x00 
mov bl, 0x07 
mov al, 70 
int 0x10 

clc 
hlt 
; Memory Data Structures and Other Variables 
;----------------------------------------------------------------- 
; Disk Address Packet Structure (Used For Loading Rest of OS) 
DAPS: db 0x10    ; Size of Structure (16 bytes) 
     db 0     ; Always 0 
     dw 1     ; Number of Sectors to Read (1x512) 
     dw 0x7E00    ; Offset to load to. 
     dw 0x0000    ; Segment to load to. 
     dq 1     ; Read from Second Block 

; Fill Out Rest of Bootloader 
;----------------------------------------------------------------- 
times 510-($-$$) db 0 

db 0x55, 0xAA    ; Add Boot Record Signature 

2階段的圖像

[ORG 0x7E00] 
[bits 16] 

mov ah, 0x0E    ; Print Character to Screen 
mov bh, 0x00    ; No Page Numbering 
mov bl, 0x07    ; White Text, Black Background 
mov al, 67     ; Print Letter C 
int 0x10 
cli 
hlt 

希望你們能幫助我！

Answer 1

INT 0×13 BIOS調用通常使用的驅動器ID在DL寄存器 - 0x80的通常是第一HDD的ID。您可能需要更改此設置，以便從USB驅動器（這可能不是第一個HDD）加載額外的扇區。