6
如果有人能幫助我，我真的很感激它，因爲它讓我瘋狂。OpenWRT - 重新編譯時丟失依賴關係
當我從頭開始編譯OpenWRT映像（包括我的包）時，通常情況下，一切正常。
否則，當我然後嘗試重新編譯時，我不斷失去依賴錯誤。
我發現唯一的解決方法是將我的軟件包放到一個完全乾淨的OpenWRT環境中，然後再次編譯所有東西。考慮到編譯整個OpenWRT映像需要花費一個多小時，這沒有什麼幫助。
這是我的錯誤：
[email protected]:~/Documents/openwrt/openwrt$ make package/amldmonitor/compile V=99
^Tmake[1]: Entering directory `/home/michael/Documents/openwrt/openwrt'
make[2]: Entering directory `/home/michael/Documents/openwrt/openwrt/package/kernel/linux'
/home/michael/Documents/openwrt/openwrt/target/linux/imx23/modules.mk:65: warning: overriding commands for target `/home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/root-x86/stamp/.kmod-usb-mxs-phy_installed'
modules/usb.mk:1079: warning: ignoring old commands for target `/home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/root-x86/stamp/.kmod-usb-mxs-phy_installed'
/home/michael/Documents/openwrt/openwrt/target/linux/imx23/modules.mk:65: warning: overriding commands for target `/home/michael/Documents/openwrt/openwrt/bin/x86/packages/kmod-usb-mxs-phy_3.8.13-1_x86.ipk'
modules/usb.mk:1079: warning: ignoring old commands for target `/home/michael/Documents/openwrt/openwrt/bin/x86/packages/kmod-usb-mxs-phy_3.8.13-1_x86.ipk'
/home/michael/Documents/openwrt/openwrt/target/linux/imx23/modules.mk:65: warning: overriding commands for target `kmod-usb-mxs-phy-clean'
modules/usb.mk:1079: warning: ignoring old commands for target `kmod-usb-mxs-phy-clean'
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kernel" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
WARNING: skipping kmod-ata-core -- package not selected
WARNING: skipping kmod-ata-ahci -- package not selected
WARNING: skipping kmod-ata-piix -- package not selected
WARNING: skipping kmod-block2mtd -- package not selected
WARNING: skipping kmod-md-mod -- package not selected
WARNING: skipping kmod-scsi-core -- package not selected
WARNING: skipping kmod-scsi-cdrom -- package not selected
WARNING: skipping kmod-crypto-core -- package not selected
WARNING: skipping kmod-crypto-hash -- package not selected
WARNING: skipping kmod-crypto-aes -- package not selected
WARNING: skipping kmod-crypto-crc32c -- package not selected
WARNING: skipping kmod-fs-ext4 -- package not selected
WARNING: skipping kmod-fs-isofs -- package not selected
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-hwmon-core" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
WARNING: skipping kmod-i2c-core -- package not selected
WARNING: skipping kmod-i2c-algo-bit -- package not selected
WARNING: skipping kmod-hid -- package not selected
WARNING: skipping kmod-input-core -- package not selected
WARNING: skipping kmod-acpi-button -- package not selected
WARNING: skipping kmod-ledtrig-netdev -- package not selected
WARNING: skipping kmod-ledtrig-default-on -- package not selected
WARNING: skipping kmod-ledtrig-timer -- package not selected
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-lib-crc-ccitt" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
WARNING: skipping kmod-lib-crc16 -- package not selected
WARNING: skipping kmod-lib-zlib -- package not selected
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-libphy" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-natsemi" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-sis900" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-via-rhine" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-via-velocity" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-8139too" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-r8169" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-ne2k-pci" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-e100" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-e1000" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-3c59x" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-pcnet32" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-tg3" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-ipt-core" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-ipt-conntrack" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-ipt-nat" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-ipt-nathelper" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-ip6tables" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
WARNING: skipping kmod-bridge -- package not selected
WARNING: skipping kmod-llc -- package not selected
WARNING: skipping kmod-stp -- package not selected
WARNING: skipping kmod-8021q -- package not selected
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-ipv6" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-tun" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-slhc" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-ppp" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-pppox" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-pppoe" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
WARNING: skipping kmod-nls-base -- package not selected
WARNING: skipping kmod-serial-8250 -- package not selected
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-pps" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install.clean; fi; echo "kmod-ptp" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/linux.default.install
WARNING: skipping kmod-random-core -- package not selected
WARNING: skipping kmod-thermal -- package not selected
WARNING: skipping kmod-pcmcia-rsrc -- package not selected
WARNING: skipping kmod-sound-seq -- package not selected
WARNING: skipping kmod-usb-core -- package not selected
WARNING: skipping kmod-usb-uhci -- package not selected
WARNING: skipping kmod-usb-ohci -- package not selected
WARNING: skipping kmod-usb2 -- package not selected
WARNING: skipping kmod-usb2-pci -- package not selected
WARNING: skipping kmod-usb-storage -- package not selected
WARNING: skipping kmod-fb -- package not selected
WARNING: skipping kmod-fb-cfb-fillrect -- package not selected
WARNING: skipping kmod-fb-cfb-copyarea -- package not selected
WARNING: skipping kmod-fb-cfb-imgblt -- package not selected
WARNING: skipping kmod-pcmcia-au1000 -- package not selected
WARNING: skipping kmod-rtc-stmp3xxx -- package not selected
WARNING: skipping kmod-usb-chipidea-imx -- package not selected
WARNING: skipping kmod-ata-rbppc-cf -- package not selected
WARNING: skipping kmod-ata-rb532-cf -- package not selected
make[2]: Leaving directory `/home/michael/Documents/openwrt/openwrt/package/kernel/linux'
make[2]: Entering directory `/home/michael/Documents/openwrt/openwrt/package/libs/toolchain'
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/toolchain.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean; fi; echo "libc" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/toolchain.default.install
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/toolchain.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean; fi; echo "libgcc" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/toolchain.default.install
WARNING: skipping libssp -- package not selected
WARNING: skipping libstdcpp -- package not selected
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/toolchain.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean; fi; echo "libpthread" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/toolchain.default.install
WARNING: skipping libthread-db -- package not selected
WARNING: skipping librt -- package not selected
WARNING: skipping libgfortran -- package not selected
WARNING: skipping ldd -- package not selected
WARNING: skipping ldconfig -- package not selected
make[2]: Leaving directory `/home/michael/Documents/openwrt/openwrt/package/libs/toolchain'
make[2]: Entering directory `/home/michael/Documents/openwrt/openwrt/package/libs/ocf-crypto-headers'
make[2]: Leaving directory `/home/michael/Documents/openwrt/openwrt/package/libs/ocf-crypto-headers'
make[2]: Entering directory `/home/michael/Documents/openwrt/openwrt/package/libs/zlib'
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/zlib.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/zlib.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/zlib.default.install.clean; fi; echo "zlib" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/zlib.default.install
make[2]: Leaving directory `/home/michael/Documents/openwrt/openwrt/package/libs/zlib'
make[2]: Entering directory `/home/michael/Documents/openwrt/openwrt/package/libs/openssl'
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/openssl.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/openssl.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/openssl.default.install.clean; fi; echo "libopenssl" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/openssl.default.install
WARNING: skipping openssl-util -- package not selected
make[2]: Leaving directory `/home/michael/Documents/openwrt/openwrt/package/libs/openssl'
make[2]: Entering directory `/home/michael/Documents/openwrt/openwrt/package/amld'
if [ -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/amld.default.install.clean ]; then rm -f /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/amld.default.install /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/amld.default.install.clean; fi; echo "amld" >> /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo/amld.default.install
make[2]: Leaving directory `/home/michael/Documents/openwrt/openwrt/package/amld'
make[2]: Entering directory `/home/michael/Documents/openwrt/openwrt/package/amldmonitor'
mkdir -p /home/michael/Documents/openwrt/openwrt/bin/x86/packages /home/michael/Documents/openwrt/openwrt/build_dir/target-i386_i486_uClibc-0.9.33.2/amldmonitor/ipkg-x86/amldmonitor/CONTROL /home/michael/Documents/openwrt/openwrt/staging_dir/target-i386_i486_uClibc-0.9.33.2/pkginfo
install -d -m0755 /home/michael/Documents/openwrt/openwrt/build_dir/target-i386_i486_uClibc-0.9.33.2/amldmonitor/ipkg-x86/amldmonitor/bin
install -m0755 /home/michael/Documents/openwrt/openwrt/build_dir/target-i386_i486_uClibc-0.9.33.2/amldmonitor/amldmonitor /home/michael/Documents/openwrt/openwrt/build_dir/target-i386_i486_uClibc-0.9.33.2/amldmonitor/ipkg-x86/amldmonitor/bin/
find /home/michael/Documents/openwrt/openwrt/build_dir/target-i386_i486_uClibc-0.9.33.2/amldmonitor/ipkg-x86/amldmonitor -name 'CVS' -o -name '.svn' -o -name '.#*' -o -name '*~'| xargs -r rm -rf
Package amldmonitor is missing dependencies for the following libraries:
libc.so.6
make[2]: *** [/home/michael/Documents/openwrt/openwrt/bin/x86/packages/amldmonitor_1_x86.ipk] Error 1
make[2]: Leaving directory `/home/michael/Documents/openwrt/openwrt/package/amldmonitor'
make[1]: *** [package/amldmonitor/compile] Error 2
make[1]: Leaving directory `/home/michael/Documents/openwrt/openwrt'
make: *** [package/amldmonitor/compile] Error 2
而我的包的Makefile：
include $(TOPDIR)/rules.mk
PKG_NAME:=amldmonitor
PKG_RELEASE:=1
include $(INCLUDE_DIR)/package.mk
define Package/amldmonitor
TITLE:=amldmontior
SECTION:=utils
CATEGORY:=Utilities
DEPENDS:=+amld +libc +libpthread
endef
CONFIGURE_VARS+= \
CC="$(TOOLCHAIN_DIR)/bin/$(TARGET_CC)"
define Build/Prepare
mkdir -p $(PKG_BUILD_DIR)
$(CP) ./files/* $(PKG_BUILD_DIR)/
endef
define Build/Compile
$(MAKE) -C $(PKG_BUILD_DIR) $(TARGET_CONFIGURE_OPTS)
endef
define Package/amldmonitor/install
$(INSTALL_DIR) $(1)/bin
$(INSTALL_BIN) $(PKG_BUILD_DIR)/amldmonitor $(1)/bin/
endef
$(eval $(call BuildPackage,amldmonitor))
這裏是Makefile中爲我的項目源文件：
LDFLAGS=-pthread
CFLAGS=-g -Wall
all: amldmonitor
amldmonitor:amldmonitor.o
$(CC) amldmonitor.o -o amldmonitor $(LDFLAGS)
amldmonitor.o: amldmonitor.c
$(CC) $(CFLAGS) -c amldmonitor.c
clean:
rm *.o amldmonitor
您是否嘗試過使用CMake的，而不是Makefile文件？到目前爲止，我對依賴libpthread，libcurl等的自己的程序沒有任何問題。 – yegorich
不，我還沒有其他的軟件包，例如依賴於libopenssl的軟件，它可以正常工作，但這只是給我帶來麻煩。 – TomSelleck