爲什麼我不能將素描上傳到我的主板？

我正在使用Roboduino板，每當我上傳眨眼草圖時，我都會收到以下錯誤消息。我在相當一段時間內使用了該板。但是從現在起問題就出現了。爲什麼我不能將素描上傳到我的主板？

- 我選擇了正確的板 - Arduino的Duemilanove或用ATmega 328（含至極我從後面長工作）

- 我現在用正確的串口COM4（我已刪除了電纜並重新連接它以確認它是COM4只有端口）。

- 我已遷到板的連接（引腳0和引腳1現在是免費的）

可能是什麼問題？如何解決這個問題？

我遇到的錯誤是

avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x8d 
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions. 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x8d

來源

2015-09-05 Shiva N

1.嘗試手動重置主板，突然點擊arduino ide上的上傳
2.您是否有其他主板？嘗試將mega328p從另一個替換到該主板。我認爲這款mega328p的bootloader損壞或芯片消失。因爲當您將電路板連接到電腦時，您可以看到com端口。 –

這是低劣的Arduino的克隆，我認爲董事會是沒有得到duely重置了或連接是壞的。嘗試選擇Arduino UNO，因爲板載ATmega328p可能使用optiboot引導加載程序。

來源

2015-09-11 09:29:33 Naaz

爲什麼我不能將素描上傳到我的主板？

回答

相關問題