我想知道如何設置simblee雲。我在admin.simbleecloud.com上創建了賬戶。當我使用Simblee RFD22122 arduino板的設備時。該電路板模塊具有將數據發送到雲並從遠程位置接收來自雲的數據的功能。但是對於雲和板模塊進行通信，我必須以PHP腳本的形式創建雲服務。由於我是PHP語言的新手。我需要解決以下兩個問題/問題。以PhP腳本的形式創建雲服務，創建HTML頁面
如何創建一個PHP腳本的形式的雲服務來獲取你發送的數據，並將其保存到任何格式你選擇一個文件（以逗號分隔，CSV，PDF，任何格式） 。？
如何創建一個HTML頁面來訪問由PHP腳本保存的數據。您甚至可以在同一臺PHP服務器上創建一個CRON作業，以自動將任何新數據推送到您的PC並截斷該文件。
有沒有必要設置任何PHP來讓事情最初談話。你需要設置雲管理員，然後添加草圖到simblee，並最終有一個網頁，運行一些JS
可以在這個鏈接找到一個完整的步行https://www.simblee.com/Simblee%20Cloud%20Reference%20v1.0.pdf我有複製粘貼下面的相關代碼只是在情況下，鏈接斷裂，但也有在那裏一些有用的信息上設置管理面板了
代碼添加到simblee
#include <SimbleeForMobile.h>
#include <SimbleeForMobileClient.h>
#include <SimbleeCloud.h>
//SimbleeCloud ESNs
unsigned int userID = 0xd448c367;
unsigned int destESN = 0x00001010;
SimbleeForMobileClient client;
SimbleeCloud cloud(&client);
//CONSTANTS
int light = 3; //green led is on GPIO2
int switchon = 5; //on switch is on GPIO5
int switchoff = 6; //off switch is on GPIO6
//STATE
int prevstate = 0;
int currentstate = 0; //0=OFF 1=ON
//SimbleeForMobile Objects
uint8_t mobileswitch, mobilelight, mobiletext;
void setup() {
pinMode(light, OUTPUT); //set light as output
pinMode(switchon, INPUT); //set switchon as input
pinMode(switchoff, INPUT); //set switchoff as input
Serial.begin(9600);
Serial.println("Light Demo Initiated");
Serial.print("The ESN of my light is: 0x");
Serial.println(cloud.myESN,HEX);
cloud.userID = userID;
SimbleeForMobile.advertisementData = "Light";
SimbleeForMobile.begin();
}
void loop() {
readswitches(); //check status of switches
if(currentstate != prevstate){
checkstate();
prevstate = currentstate;
}
if(SimbleeForMobile.updatable){
SimbleeForMobile.updateColor(mobilelight, currentstate ? GREEN : BLACK);
SimbleeForMobile.updateValue(mobileswitch, currentstate);
SimbleeForMobile.updateText(mobiletext, currentstate ? "ON" : "OFF");
SimbleeForMobile.updateColor(mobiletext, currentstate ? BLACK : WHITE);
SimbleeForMobile.updateX(mobiletext, currentstate ? 115 : 100);
}
SimbleeForMobile.process();
cloud.process();
}
void ui(){
if(cloud.connect())
Serial.println("Cloud connected");
else
Serial.println("Cloud disconnected");
SimbleeForMobile.beginScreen();
mobilelight = SimbleeForMobile.drawRect(30,80,260,260,BLACK);
mobileswitch = SimbleeForMobile.drawSwitch(135,380);
mobiletext = SimbleeForMobile.drawText(100,180,"OFF",WHITE,60);
SimbleeForMobile.setEvents(mobileswitch, EVENT_PRESS);
SimbleeForMobile.endScreen();
}
void ui_event(event_t &event){
if(event.id == mobileswitch){
currentstate = !currentstate;
}
}
void SimbleeCloud_onReceive(unsigned int originESN, const unsigned char *payload, int len){
Serial.println("Cloud Switch");
if(payload[0] == '1'){
currentstate = 1;
}
else if(payload[0] == '0'){
currentstate = 0;
}
else{
if(currentstate == 1)
cloud.send(destESN,"1",1);
else
cloud.send(destESN,"0",1);
}
}
void readswitches(){
if(digitalRead(switchon) == HIGH){
currentstate = 1;
}
if(digitalRead(switchoff) == HIGH){
currentstate = 0;
}
}
void checkstate(){
if(currentstate == 1){
digitalWrite(light, HIGH);
if(cloud.active()){
cloud.send(destESN, "1", 1);
Serial.println("SENT");
}
Serial.println("Light is ON");
}
else{
digitalWrite(light, LOW);
if(cloud.active()){
cloud.send(destESN, "0", 1);
Serial.println("SENT");
}
Serial.println("Light is OFF");
}
}
void SimbleeForMobile_onConnect(){
Serial.println("Mobile connected");
}
void SimbleeForMobile_onDisconnect(){
Serial.println("Mobile disconnected");
Serial.println("Cloud disconnected");
}
代碼示例網頁。變化的ESN等，以配合您的模塊設置
<style>
body {text-align:center;}
</style>
<h1>Light Cloud Demo</h1>
Cloud Status:<div id=status>Disconnected
</div>
Light Status:<div id=lamp>Disconnected
</div>
<img id="Light"
style="padding-left:28px"
src="https://sandbox.simblee.com/~acct1010/Images/LightOff.png"
alt="Light Off"
height = "400"
width = "400">
<br>
<br>
<br>
<button id=switchon>Light On</button>
<button id=switchoff>Light Off</button>
<script type="text/javascript" src="SimbleeCloud.js"></script>
<script type="text/javascript">
var output = document.getElementById("status");
var light = document.getElementById("Light");
var cloud = new SimbleeCloud();
cloud.myESN = 0x00001010;
cloud.userID = 0xd448c367;
destESN = 0x75f4047a;
cloud.connect();
cloud.onactive = function() {
output.innerHTML = "Connected";
var payload = new ArrayBuffer(1);
var view = new DataView(payload);
view.setUint8(0,"2".charCodeAt(0));
cloud.send(destESN, payload);
}
cloud.oninactive = function() {
output.innerHTML = "Disconnected";
}
setInterval(function(){
var payload = new ArrayBuffer(1);
var view = new DataView(payload);
view.setUint8(0,"2".charCodeAt(0));
cloud.send(destESN,payload);
},1000);
var myVar = setInterval(function myTimer(){
lamp.innerHTML = "Disconnected";
}
, 2000);
document.getElementById("switchon").onclick = function() {
var payload = new ArrayBuffer(1);
var view = new DataView(payload);
view.setUint8(0,"1".charCodeAt(0));
cloud.send(destESN, payload);
}
document.getElementById("switchoff").onclick = function() {
var payload = new ArrayBuffer(1);
var view = new DataView(payload);
view.setUint8(0,"0".charCodeAt(0));
cloud.send(destESN, payload);
}
cloud.onrequest = function(originESN,payload){
window.clearInterval(myVar);
myVar = setInterval(function myTimer(){
lamp.innerHTML = "Disconnected";
},1500);
var view = new DataView(payload);
var data = String.fromCharCode(view.getUint8(0));
lamp.innerHTML = "Connected";
if(data == '1'){
light.src = "https://sandbox.simblee.com/~acct1010/Images/LightOn.png";
}
else if(data =='0'){
light.src = "https://sandbox.simblee.com/~acct1010/Images/LightOff.png";
}
}
</script>
最後simblee.js看起來像這樣
/*
* Copyright (c) 2015 RF Digital Corp. All Rights Reserved.
*
* The source code contained in this file and all intellectual property embodied in
* or covering the source code is the property of RF Digital Corp. or its licensors.
* Your right to use this source code and intellectual property is non-transferable,
* non-sub licensable, revocable, and subject to terms and conditions of the
* SIMBLEE SOFTWARE LICENSE AGREEMENT.
* http://www.simblee.com/licenses/SimbleeSoftwareLicenseAgreement.txt
*
* THE SOURCE CODE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.
*
* This heading must NOT be removed from this file.
*/
SimbleeCloud = function(esn, userid) {
this.myESN = esn || 0x00000000;
this.userID = userid || 0x00000000;
this.assignedESN = null;
this.active = false;
this.onactive = null;
this.oninactive = null;
this.oninitial = null;
this.onrequest = null;
this.oncountresult = null;
};
SimbleeCloud.prototype = {};
SimbleeCloud.MAX_MODULE_PAYLOAD = 180;
SimbleeCloud.LITTLE_ENDIAN = true;
SimbleeCloud.MCS_FUNCTION_CALL = 0xffffffff;
SimbleeCloud.MCS_FUNCTION_NONE = 0;
SimbleeCloud.MCS_FUNCTION_PING = 1;
SimbleeCloud.MCS_FUNCTION_PONG = 2;
SimbleeCloud.MCS_FUNCTION_COUNT = 3;
SimbleeCloud.MCS_FUNCTION_INITIAL = 4;
/*
SimbleeCloud.prototype._var = false;
Object.defineProperty(SimbleeCloud.prototype, 'var',
{ get: function() {
return this._var;
},
set: function(v) {
this._var = v;
} });
*/
SimbleeCloud.prototype.copyBytes = function(target, source, targetOffset, sourceOffset, length) {
targetOffset = targetOffset || 0;
sourceOffset = sourceOffset || 0;
length = length || source.byteLength;
var view = new Uint8Array(target, targetOffset);
view.set(new Uint8Array(source, sourceOffset, length));
};
SimbleeCloud.prototype.send = function(destESN, payload) {
var len = payload.byteLength;
if (len > SimbleeCloud.MAX_MODULE_PAYLOAD)
len = SimbleeCloud.MAX_MODULE_PAYLOAD;
var msg_len = 1 + 4 + len;
var buffer = new ArrayBuffer(1 + 4 + len);
var view = new DataView(buffer);
view.setUint8(0, 1 + 4 + len);
view.setUint32(1, destESN, SimbleeCloud.LITTLE_ENDIAN);
this.copyBytes(buffer, payload, 5, 0, len);
this.websocket.send(buffer);
};
SimbleeCloud.prototype.onwebsocketopen = function() {
// "this" is the websocket, not the SimbleeCloud object
var self = this.outer;
// start byte
self.websocket.send("!");
// start message (my esn, then user id for authorization)
var payload = new ArrayBuffer(4);
var view = new DataView(payload);
view.setUint32(0, self.userID, SimbleeCloud.LITTLE_ENDIAN);
self.send(self.myESN, payload);
};
SimbleeCloud.prototype.countasync = function(esn) {
var payload = new ArrayBuffer(5);
var view = new DataView(payload);
view.setUint8(0, SimbleeCloud.MCS_FUNCTION_COUNT);
view.setUint32(1, esn, SimbleeCloud.LITTLE_ENDIAN);
this.send(SimbleeCloud.MCS_FUNCTION_CALL, payload);
};
SimbleeCloud.prototype.onmcsfunctioncall = function(requestBuffer) {
var requestView = new DataView(requestBuffer);
var funct = requestView.getUint8(5);
if (funct == SimbleeCloud.MCS_FUNCTION_PING)
{
// console.log("ping");
// send pong (retaining conv area)
var responseBuffer = requestBuffer.slice(0);
var responseView = new DataView(responseBuffer);
responseView.setUint8(5, SimbleeCloud.MCS_FUNCTION_PONG);
this.websocket.send(responseBuffer);
}
else if (funct == SimbleeCloud.MCS_FUNCTION_PONG)
{
// process pong
}
else if (funct == SimbleeCloud.MCS_FUNCTION_COUNT)
{
// process count result
var result = requestView.getUint32(6, true);
if (this.oncountresult)
this.oncountresult(result);
}
else if (funct == SimbleeCloud.MCS_FUNCTION_INITIAL)
{
// process initial
var esn = requestView.getUint32(6, true);
if (this.oninitial)
this.oninitial(esn);
}
// ignore unknown mcs function calls
};
SimbleeCloud.prototype.onprocess = function(buffer) {
var view = new DataView(buffer);
var len = view.getUint8(0);
var originESN = view.getUint32(1, true);
// pool response
if (originESN == this.myESN) {
this.assignedESN = view.getUint32(5, true);
// console.log("assignedESN = 0x" + this.assignedESN.toString(16));
}
if (! this.active) {
this.active = true;
if (this.onactive)
this.onactive();
}
// pool response
if (originESN == this.myESN)
return;
if (originESN == SimbleeCloud.MCS_FUNCTION_CALL) {
this.onmcsfunctioncall(buffer);
return;
}
if (this.onrequest) {
var payload = buffer.slice(5);
this.onrequest(originESN, payload);
}
};
SimbleeCloud.prototype.onwebsocketmessage = function(evt) {
// "this" is the websocket, not the SimbleeCloud object
var self = this.outer;
var fileReader = new FileReader();
fileReader.onload = function() {
self.onprocess(this.result);
};
fileReader.readAsArrayBuffer(evt.data);
};
SimbleeCloud.prototype.onwebsocketerror = function(evt) {
var code = evt.code;
// "this" is the websocket, not the SimbleeCloud object
var self = this.outer;
};
SimbleeCloud.prototype.onwebsocketclose = function(evt) {
var code = evt.code;
// See http://tools.ietf.org/html/rfc6455#section-7.4.1
var reason;
if (code == 1000)
reason = "Normal closure, meaning that the purpose for which the connection was established has been fulfilled.";
else if(code == 1001)
reason = "An endpoint is \"going away\", such as a server going down or a browser having navigated away from a page.";
else if(code == 1002)
reason = "An endpoint is terminating the connection due to a protocol error";
else if(code == 1003)
reason = "An endpoint is terminating the connection because it has received a type of data it cannot accept (e.g., an endpoint that understands only text data MAY send this if it receives a binary message).";
else if(code == 1004)
reason = "Reserved. The specific meaning might be defined in the future.";
else if(code == 1005)
reason = "No status code was actually present.";
else if(code == 1006)
reason = "The connection was closed abnormally, e.g., without sending or receiving a Close control frame";
else if(code == 1007)
reason = "An endpoint is terminating the connection because it has received data within a message that was not consistent with the type of the message (e.g., non-UTF-8 [http://tools.ietf.org/html/rfc3629] data within a text message).";
else if(code == 1008)
reason = "An endpoint is terminating the connection because it has received a message that \"violates its policy\". This reason is given either if there is no other sutible reason, or if there is a need to hide specific details about the policy.";
else if(code == 1009)
reason = "An endpoint is terminating the connection because it has received a message that is too big for it to process.";
else if(code == 1010) // Note that this status code is not used by the server, because it can fail the WebSocket handshake instead.
reason = "An endpoint (client) is terminating the connection because it has expected the server to negotiate one or more extension, but the server didn't return them in the response message of the WebSocket handshake. <br /> Specifically, the extensions that are needed are: " + event.reason;
else if(code == 1011)
reason = "A server is terminating the connection because it encountered an unexpected condition that prevented it from fulfilling the request.";
else if(code == 1015)
reason = "The connection was closed due to a failure to perform a TLS handshake (e.g., the server certificate can't be verified).";
else
reason = "Unknown reason";
// console.log("onwebsocketclose: " + code + " - " + reason);
// "this" is the websocket, not the SimbleeCloud object
var self = this.outer;
if (self.active) {
self.active = false;
if (self.oninactive)
self.oninactive();
}
};
SimbleeCloud.prototype.connect = function() {
try
{
this.websocket = new WebSocket("wss://connect.simbleecloud.com:443");
this.websocket.outer = this;
this.websocket.onopen = this.onwebsocketopen;
this.websocket.onmessage = this.onwebsocketmessage;
this.websocket.onerror = this.onwebsocketerror;
this.websocket.onclose = this.onwebsocketclose;
}
catch(e)
{
console.log(e);
}
};
在代碼中，你可以從這個PDF格式的鏈接下載，你可以得到一些例如PHP但這個基本的例子不需要它