0
我想編譯Python到DD-WRT（DD-WRT v24-sp2（SVN修訂版：14896））上的一個路由器（華碩RT-N16） 。 JFFS2（因此ipkg）和Optware不是選項。我需要做一個直接的交叉編譯。我是交叉編譯的新手。交叉編譯海灣合作委員會的失敗（Python）
我想這些方向如下： http://www.cnx-software.com/2011/02/04/cross-compiling-python-for-mips-and-arm-platforms/
我也嘗試過這些方向，但得到了同樣的錯誤（這是我剛剛完成做什麼）： http://www.embecosm.com/appnotes/ean9/ean9-howto-newlib-1.0.pdf
但我不斷收到如下：
[email protected]:~/Desktop/Python-2.7.3$ sudo CC=mipsel-linux-gcc CXX=mipsel-linux-g++ AR=mipsel-linux-ar RANLIB=mipsel-linux-ranlib ./configure -host=mipsel-linux -target=mipsel-linux -prefix=/python
configure: WARNING: if you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used
checking for --enable-universalsdk... no
checking for --with-universal-archs... 32-bit
checking MACHDEP... linux2
checking EXTRAPLATDIR...
checking machine type as reported by uname -m... i686
checking for --without-gcc... no
checking for mipsel-linux-gcc... mipsel-linux-gcc
checking whether the C compiler works... no
configure: error: in `/home/majik/Desktop/Python-2.7.3':
configure: error: C compiler cannot create executables
See `config.log' for more details
我的config.log包含以下內容：
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by python configure 2.7, which was
generated by GNU Autoconf 2.67. Invocation command line was
$ ./configure -host=mipsel-linux -target=mipsel-linux -prefix=/python
## --------- ##
## Platform. ##
## --------- ##
hostname = ubuntu
uname -m = i686
uname -r = 3.2.0-37-generic-pae
uname -s = Linux
uname -v = #58-Ubuntu SMP Thu Jan 24 15:51:02 UTC 2013
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2756: checking for --enable-universalsdk
configure:2797: result: no
configure:2806: checking for --with-universal-archs
configure:2823: result: 32-bit
configure:2980: checking MACHDEP
configure:3129: result: linux2
configure:3135: checking EXTRAPLATDIR
configure:3150: result:
configure:3161: checking machine type as reported by uname -m
configure:3164: result: i686
configure:3177: checking for --without-gcc
configure:3221: result: no
configure:3242: checking for mipsel-linux-gcc
configure:3269: result: mipsel-linux-gcc
configure:3538: checking for C compiler version
configure:3547: mipsel-linux-gcc --version >&5
./configure: line 3549: mipsel-linux-gcc: command not found
configure:3558: $? = 127
configure:3547: mipsel-linux-gcc -v >&5
./configure: line 3549: mipsel-linux-gcc: command not found
configure:3558: $? = 127
configure:3547: mipsel-linux-gcc -V >&5
./configure: line 3549: mipsel-linux-gcc: command not found
configure:3558: $? = 127
configure:3547: mipsel-linux-gcc -qversion >&5
./configure: line 3549: mipsel-linux-gcc: command not found
configure:3558: $? = 127
configure:3578: checking whether the C compiler works
configure:3600: mipsel-linux-gcc conftest.c >&5
./configure: line 3602: mipsel-linux-gcc: command not found
configure:3604: $? = 127
configure:3642: result: no
configure: failed program was:
| /* confdefs.h */
| #define _GNU_SOURCE 1
| #define _NETBSD_SOURCE 1
| #define __BSD_VISIBLE 1
| #define _BSD_TYPES 1
| #define _DARWIN_C_SOURCE 1
| #define _XOPEN_SOURCE 600
| #define _XOPEN_SOURCE_EXTENDED 1
| #define _POSIX_C_SOURCE 200112L
| /* end confdefs.h. */
|
| int
| main()
| {
|
| ;
| return 0;
| }
configure:3647: error: in `/home/majik/Desktop/Python-2.7.3':
configure:3649: error: C compiler cannot create executables
See `config.log' for more details
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_env_CC_set=set
ac_cv_env_CC_value=mipsel-linux-gcc
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=mipsel-linux
ac_cv_env_target_alias_set=set
ac_cv_env_target_alias_value=mipsel-linux
ac_cv_prog_CC=mipsel-linux-gcc
## ----------------- ##
## Output variables. ##
## ----------------- ##
AR='mipsel-linux-ar'
ARCH_RUN_32BIT=''
ARFLAGS=''
BASECFLAGS=''
BLDLIBRARY=''
BLDSHARED=''
BUILDEXEEXT=''
CC='mipsel-linux-gcc'
CCSHARED=''
CFLAGS=''
CFLAGSFORSHARED=''
CONFIGURE_MACOSX_DEPLOYMENT_TARGET=''
CONFIG_ARGS=' '\''-host=mipsel-linux'\'' '\''-target=mipsel-linux'\'' '\''-prefix=/python'\'' '\''host_alias=mipsel-linux'\'' '\''target_alias=mipsel-linux'\'' '\''CC=mipsel-linux-gcc'\'''
CPP=''
CPPFLAGS=''
CXX='mipsel-linux-g++'
DEFS=''
DLINCLDIR=''
DLLLIBRARY=''
DYNLOADFILE=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
EXPORT_MACOSX_DEPLOYMENT_TARGET='#'
EXTRAMACHDEPPATH=''
EXTRAPLATDIR=''
FRAMEWORKALTINSTALLFIRST=''
FRAMEWORKALTINSTALLLAST=''
FRAMEWORKINSTALLAPPSPREFIX=''
FRAMEWORKINSTALLFIRST=''
FRAMEWORKINSTALLLAST=''
FRAMEWORKUNIXTOOLSPREFIX='/python'
GNULD=''
GREP=''
HAS_HG=''
HAVE_GETHOSTBYNAME=''
HAVE_GETHOSTBYNAME_R=''
HAVE_GETHOSTBYNAME_R_3_ARG=''
HAVE_GETHOSTBYNAME_R_5_ARG=''
HAVE_GETHOSTBYNAME_R_6_ARG=''
HGBRANCH=''
HGTAG=''
HGVERSION=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
INSTSONAME=''
LDCXXSHARED=''
LDFLAGS=''
LDLAST=''
LDLIBRARY=''
LDLIBRARYDIR=''
LDSHARED=''
LIBC=''
LIBFFI_INCLUDEDIR=''
LIBM=''
LIBOBJS=''
LIBRARY=''
LIBS=''
LIBTOOL_CRUFT=''
LINKCC=''
LINKFORSHARED=''
LIPO_32BIT_FLAGS=''
LN=''
LTLIBOBJS=''
MACHDEP='linux2'
MACHDEP_OBJS=''
MAINCC=''
OBJEXT=''
OPT=''
OTHER_LIBTOOL_OPT=''
PACKAGE_BUGREPORT='http://bugs.python.org/'
PACKAGE_NAME='python'
PACKAGE_STRING='python 2.7'
PACKAGE_TARNAME='python'
PACKAGE_URL=''
PACKAGE_VERSION='2.7'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PYTHONFRAMEWORK=''
PYTHONFRAMEWORKDIR='no-framework'
PYTHONFRAMEWORKIDENTIFIER='org.python.python'
PYTHONFRAMEWORKINSTALLDIR=''
PYTHONFRAMEWORKPREFIX=''
RANLIB='mipsel-linux-ranlib'
RUNSHARED=''
SGI_ABI=''
SHELL='/bin/bash'
SHLIBS=''
SIGNAL_OBJS=''
SO=''
SOVERSION='1.0'
SRCDIRS=''
SVNVERSION=''
THREADHEADERS=''
THREADOBJ=''
TRUE=''
UNICODE_OBJS=''
UNIVERSALSDK=''
UNIVERSAL_ARCH_FLAGS=''
USE_SIGNAL_MODULE=''
USE_THREAD_MODULE=''
VERSION='2.7'
ac_ct_CC=''
bindir='${exec_prefix}/bin'
build_alias=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host_alias='mipsel-linux'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/python'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias='mipsel-linux'
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define _GNU_SOURCE 1
#define _NETBSD_SOURCE 1
#define __BSD_VISIBLE 1
#define _BSD_TYPES 1
#define _DARWIN_C_SOURCE 1
#define _XOPEN_SOURCE 600
#define _XOPEN_SOURCE_EXTENDED 1
#define _POSIX_C_SOURCE 200112L
configure: exit 77
任何建議將不勝感激。我有我正在編譯的系統，但除非我在工作中，否則我無法訪問路由器（直到下週二纔會回到那裏）。但是交叉編譯器就是這個問題。據我所知，一旦全部編譯完成，該文件夾只需要被複制（通過scp）到路由器。謝謝！
〜BB
這看起來很有趣：'mipsel-linux-gcc：command not found'。另外，你肯定路由器有足夠的資源來運行Python 2.7嗎？ – Blender 2013-03-19 19:52:57
我建議做hello.c（即bareminimum c程序）並驗證你可以運行mipsel-linux-gcc來產生mips二進制 – Foon 2013-04-17 14:38:50