WinUSB安裝

Question

我想用WinUSB做一點實驗。我已經安裝了WinDDK，並且即將爲我的驅動程序創建我的第一個INF文件。我正在關注MSDN guide來做到這一點。該指南包含一個示例INF文件以及「將部分名稱中的USB_Install更改爲適當的DDInstall值」的說明。

不夠公平，唯一的問題是我不知道'合適的DDInstall值'是什麼。

我不是真的有INF文件的專家，我只能猜測，引導大概想讓我改變示例文件

[USB_Install] 
Include = winusb.inf 
Needs = WINUSB.NT 

在節頭比[USB_Install]不同內容部分名稱。關於DDInstall的唯一解釋是我找到的只是關於如何處理本節的一般解釋（Also on MSDN）。

我的問題是，我應該把我的INF文件，而不是[USB_Install]字符串？

Answer 1

我試圖遵循相同的MSDN指南並遇到幾個問題。我最終使用了Microchip的WinUSB驅動程序模板。該模板可在Microchip Application Libraries中找到。

這與MSDN給出的例子有些不同，但它適用於我的系統。它也可以與最新的WDK（版本8.0）附帶的工具和dll文件一起使用。

雖然這不能解決您的問題，但我認爲這是一個比MSDN提供的更好的模板。

這裏是inf文件Microchip提供：

;This .inf file is a modified version of the example INF provided 
;in the Microsoft document: 
;"How to Use WinUSB to Communicate with a USB Device" 


[Version] 
Signature = "$Windows NT$" 
Class = CustomUSBDevices 
ClassGuid= {a503e2d3-a031-49dc-b684-c99085dbfe92} 
Provider = %MFGNAME% 
DriverVer=07/20/2012,1.0.0.4 
CatalogFile=winusb.cat ;CAT file needed for a signed driver pacakage 
;------------------------------------------------------------------------------ 
; ========== Manufacturer/Models sections =========== 
;------------------------------------------------------------------------------ 
[Manufacturer] 
%MFGNAME% = MyDevice_WinUSB,NTx86,NTamd64 

;------------------------------------------------------------------------------ 
; Vendor and Product ID Definitions 
;------------------------------------------------------------------------------ 
; When developing your custom USB device, the VID and PID used in the PC side 
; application program and the firmware on the microcontroller must match. 
; Modify the below lines to use your VID and PID. Use the format as shown below. 
; Note: One INF file can be used for multiple devices with different VID and PIDs. 
; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. 
; There is a maximum number of devices that can be supported per line however. 
; If you append a large number of VID/PIDs to the end of the line, and get a: 
; "The data area passed to a system call is too small." error when trying to install 
; the INF, try removing some of the VIDs/PIDs. 
;------------------------------------------------------------------------------ 
[MyDevice_WinUSB.NTx86] 
%DESCRIPTION% =USB_Install, USB\VID_04d8&PID_0204 

[MyDevice_WinUSB.NTamd64] 
%DESCRIPTION% =USB_Install, USB\VID_04d8&PID_0204 


;========================================================================================= 
;ClassInstall32 and ClassInstall_AddReg sections used to make new device manager category. 
;========================================================================================= 
[ClassInstall32] 
AddReg=ClassInstall_AddReg 

[ClassInstall_AddReg] 
HKR,,,,%DEVICEMANAGERCATEGORY% 
HKR,,Icon,,"-20" 


; =================== Installation =================== 

[USB_Install] 
Include=winusb.inf 
Needs=WINUSB.NT 

[USB_Install.Services] 
Include=winusb.inf 
AddService=WinUSB,0x00000002,WinUSB_ServiceInstall 

[WinUSB_ServiceInstall] 
DisplayName  = %WinUSB_SvcDesc% 
ServiceType  = 1 
StartType  = 3 
ErrorControl = 1 
ServiceBinary = %12%\WinUSB.sys 

[USB_Install.Wdf] 
KmdfService=WINUSB, WinUsb_Install 

[WinUSB_Install] 
KmdfLibraryVersion=1.11 

[USB_Install.HW] 
AddReg=Dev_AddReg 

[Dev_AddReg] 
HKR,,DeviceInterfaceGUIDs,0x10000,"{58D07210-27C1-11DD-BD0B-0800200C9a66}" 
;When editing the GUID (the big hex number with dashes inside the squiggly 
;braces), make sure to write the intended PC application to use the same GUID. 
;Otherwise the application won't be able to find the USB device properly. 

[USB_Install.CoInstallers] 
AddReg=CoInstallers_AddReg 
CopyFiles=CoInstallers_CopyFiles 

[CoInstallers_AddReg] 
HKR,,CoInstallers32,0x00010000,"WdfCoInstaller01011.dll,WdfCoInstaller","WinUSBCoInstaller2.dll" 

[CoInstallers_CopyFiles] 
WinUSBCoInstaller2.dll 
WdfCoInstaller01011.dll 

[DestinationDirs] 
CoInstallers_CopyFiles=11 

; ================= Source Media Section ===================== 

[SourceDisksNames] 
1 = %DISK_NAME%,,,\i386 
2 = %DISK_NAME%,,,\amd64 

[SourceDisksFiles.x86] 
WinUSBCoInstaller2.dll=1 
WdfCoInstaller01011.dll=1 

[SourceDisksFiles.amd64] 
WinUSBCoInstaller2.dll=2 
WdfCoInstaller01011.dll=2 

; =================== Strings =================== 

[Strings] 
MFGNAME="Your Manufacturer Name" ; ManufacturerName 
DESCRIPTION="Your USB Device Name" ; DeviceName 
WinUSB_SvcDesc="WinUSB Device" 
DISK_NAME="WinUSB Device Install Disk" ; DiskName 
DEVICEMANAGERCATEGORY="Custom USB Devices" ; ClassName