-1
我正嘗試在我的Beaglebone黑色上啓動WiFi接入點。 沒有brige。我只是想從我的手機連接到AP來設置一些自定義配置。BeagleBone WiFi接入點
我安裝hostapd成功，並編輯以下配置文件： 我使用Linux的埃（內核3.8）
等/網絡/接口
#When auto_bridge is "yes" then init.script makes bridge itself
#when aut_bridge is "no" then init.script start /etc/network/bridge
AUTO_BRIDGE=yes
STP_ENABLE=no
FD_TIMER=0
GCINT_TIMER=0
#BR0_USE_DHCP=no
#BR0_IPADDR=192.168.0.50/24
IPV4_FORWARD_ENABLE=yes
START_IPTABLES=yes
VLAN_START=yes
WLAN_ENABLED=yes
WLAN_FORCEIP=no
WLAN_IN_BR0=yes
WLAN_USE_DHCP=yes
WLAN_IPADDR=192.168.0.5/24
WLAN_MACADDR=00006c576976
WLAN_BURST=no
WLAN_USE_UNCHECKED_MIBS=no
等/ udhcpd.conf
start 192.168.0.10 #default: 192.168.0.20
end 192.168.0.15 #default: 192.168.0.254
# The interface that udhcpd will use
interface wlan0 #default: eth0
opt dns xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
option subnet 255.255.255.0
opt router 192.168.0.5
option lease 864000
等/ hostapd/hostapd.conf
# Basic configuration
interface=wlan0
ssid=MyNet
channel=1
#bridge=br0
# WPA and WPA2 configuration
auth_algs=1
ignore_broadcast_ssid=0
wpa=3
wpa_passphrase=aaaaaaaaaa
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
# Hardware configuration
driver=rtl871xdrv
ieee80211n=1
hw_mode=g
device_name=RTL8188CU
manufacturer=Realtek
這之後我寫connamd行：
sh-4.2# udhcpd /etc/udhcpd.conf
sh-4.2# hostapd /etc/hostapd/hostapd.conf
Configuration file: /etc/hostapd/hostapd.conf
drv->ifindex=4
l2_sock_recv==l2_sock_xmit=0x0x63648
+rtl871x_sta_deauth_ops, ff:ff:ff:ff:ff:ff is deauth, reason=2
rtl871x_set_key_ops
rtl871x_set_key_ops
rtl871x_set_key_ops
rtl871x_set_key_ops
Using interface wlan0 with hwaddr 00:0f:13:76:1d:6b and ssid 'MyNet'
rtl871x_set_wps_assoc_resp_ie
rtl871x_set_wps_beacon_ie
rtl871x_set_wps_probe_resp_ie
rtl871x_set_key_ops
rtl871x_set_beacon_ops
rtl871x_set_hidden_ssid_ops
+rtl871x_get_sta_wpaie, 00:a0:c6:fe:5e:ec is sta's address
亞特這個我想從我的手機連接到AP。 見請hostapd的follwing日誌：
wlan0: STA 00:a0:c6:fe:5e:ec IEEE 802.11: associated
rtl871x_set_key_ops
rtl871x_set_key_ops
rtl871x_set_key_ops
+rtl871x_send_eapol
+rtl871x_send_eapol
rtl871x_set_key_ops
wlan0: AP-STA-CONNECTED 00:a0:c6:fe:5e:ec
wlan0: STA 00:a0:c6:fe:5e:ec RADIUS: starting accounting session 52AC6766-00000000
wlan0: STA 00:a0:c6:fe:5e:ec WPA: pairwise key handshake completed (RSN)
wlan0: STA 00:a0:c6:fe:5e:ec IEEE 802.11: disassociated
wlan0: AP-STA-DISCONNECTED 00:a0:c6:fe:5e:ec
rtl871x_set_key_ops
rtl871x_set_key_ops
+rtl871x_sta_remove_ops, 00:a0:c6:fe:5e:ec is sta address removed
+rtl871x_get_sta_wpaie, 00:a0:c6:fe:5e:ec is sta's address
wlan0: STA 00:a0:c6:fe:5e:ec IEEE 802.11: associated
rtl871x_set_key_ops
rtl871x_set_key_ops
+rtl871x_send_eapol
+rtl871x_send_eapol
rtl871x_set_key_ops
wlan0: AP-STA-CONNECTED 00:a0:c6:fe:5e:ec
wlan0: STA 00:a0:c6:fe:5e:ec RADIUS: starting accounting session 52AC6766-00000001
wlan0: STA 00:a0:c6:fe:5e:ec WPA: pairwise key handshake completed (RSN)
在我的手機，我看到的消息：
Connecting
Autentification
Getting ip address
Connecting
Autentification
Getting ip address
Connecting
Autentification
Getting ip address
我的手機不能連接到AP作爲一個結果。 我認爲這個問題在udhcpd中。
請幫我找到問題。
感謝