2
我建我用下面的MSBuild命令應用msdeploy deploy.cmd文件解析不正確的參數
msbuild ProjectFile.csproj /target:Rebuild;Package /p:Configuration=Debug;DeployOnBuild=True;PackageLocation=".\obj\Debug\CAREwebNet.zip";PackageAsSingleFile=True
這將產生一個projectFile.deploy.cmd文件，我應該可以使用下面的命令部署
ProjectFile.Deploy.cmd /Y /M:MachineName "-replace:match=log4net.config.Debug,replace=log4net.config"
，但我得到以下錯誤
錯誤：無法識別的說法「「-replace：匹配= log4net.config.Debug，更換= log4n et.config「」。所有參數必須以「 - 」開頭。 錯誤計數：1.
或者我嘗試以下方法...不是沒有引號
ProjectFile.Deploy.cmd /Y /M:MachineName -replace:match=log4net.config.Debug,replace=log4net.config
，我得到以下...
錯誤：無法識別的說法「log4net.config.Debug 」。所有參數必須以「 - 」開頭。 錯誤計數：1.
我已經嘗試了許多不同的選項......並且我已經嘗試通過它與團隊成員合作。我們實際上有一個非常相似的項目，我們可以做同樣的事情，並且完美地工作（帶有引號的項目）。
下面是由VS構建的deploy.cmd文件內容。
@rem ---------------------------------------------------------------------------------
@rem Copyright 2008 Microsoft Corporation. All rights reserved.
@rem This is provided as sample to deploy the package using msdeploy.exe
@rem For information about IIS Web Deploy technology,
@rem please visit http://go.microsoft.com/?linkid=9278654
@rem Note: This batch file assumes the package and setparametsrs.xml are in the same folder with this file
@rem ---------------------------------------------------------------------------------
@if %_echo%!==! echo off
setlocal
@rem ---------------------------------------------------------------------------------
@rem Please Make sure you have Web Deploy install in your machine.
@rem Alternatively, you can explicit set the MsDeployPath to the location it is on your machine
@rem set MSDeployPath="C:\Program Files (x86)\IIS\Microsoft Web Deploy V3\"
@rem ---------------------------------------------------------------------------------
@rem ---------------------------------------------------------------------------------
@rem if user does not set MsDeployPath environment variable, we will try to retrieve it from registry.
@rem ---------------------------------------------------------------------------------
if "%MSDeployPath%" == "" (
for /F "usebackq tokens=1,2,*" %%h in (`reg query "HKLM\SOFTWARE\Microsoft\IIS Extensions\MSDeploy" /s ^| findstr -i "InstallPath"`) do (
if /I "%%h" == "InstallPath" (
if /I "%%i" == "REG_SZ" (
if not "%%j" == "" (
if "%%~dpj" == "%%j" (
set MSDeployPath=%%j
))))))
if not exist "%MSDeployPath%\msdeploy.exe" (
echo. msdeploy.exe is not found on this machine. Please install Web Deploy before execute the script.
echo. Please visit http://go.microsoft.com/?linkid=9278654
goto :usage
)
set RootPath=%~dp0
if /I "%_DeploySetParametersFile%" == "" (
set _DeploySetParametersFile=%RootPath%CAREwebNet.SetParameters.xml
)
set _ArgTestDeploy=
set _ArgDestinationType=auto
set _ArgComputerName=
set _ArgUserName=
set _ArgPassword=
set _ArgEncryptPassword=
set _ArgIncludeAcls=False
set _ArgAuthType=
set _ArgtempAgent=
set _ArgLocalIIS=
set _ArgLocalIISVersion=
@rem ---------------------------------------------------------------------------------
@rem Simple Parse the arguments
@rem ---------------------------------------------------------------------------------
:NextArgument
set _ArgCurrentOriginal=%1
set _ArgCurrent=%~1
if /I "%_ArgCurrent%" == "" goto :GetStarted
if /I "%_ArgCurrent%" == "/T" set _ArgTestDeploy=true&goto :ArgumentOK
if /I "%_ArgCurrent%" == "/Y" set _ArgTestDeploy=false&goto :ArgumentOK
if /I "%_ArgCurrent%" == "/L" set _ArgLocalIIS=true&goto :ArgumentOK
set _ArgFlag=%_ArgCurrent:~0,3%
set _ArgValue=%_ArgCurrent:~3%
if /I "%_ArgFlag%" == "/M:" set _ArgComputerName=%_ArgValue%&goto :ArgumentOK
if /I "%_ArgFlag%" == "/U:" set _ArgUserName=%_ArgValue%&goto :ArgumentOK
if /I "%_ArgFlag%" == "/P:" set _ArgPassword=%_ArgValue%&goto :ArgumentOK
if /I "%_ArgFlag%" == "/E:" set _ArgEncryptPassword=%_ArgValue%&goto :ArgumentOK
if /I "%_ArgFlag%" == "/I:" set _ArgIncludeAcls=%_ArgValue%&goto :ArgumentOK
if /I "%_ArgFlag%" == "/A:" set _ArgAuthType=%_ArgValue%&goto :ArgumentOK
if /I "%_ArgFlag%" == "/G:" set _ArgtempAgent=%_ArgValue%&goto :ArgumentOK
@rem Any addition flags, pass through to the msdeploy
set _ArgMsDeployAdditionalFlags=%_ArgMsDeployAdditionalFlags% %_ArgCurrentOriginal%
:ArgumentOK
shift
goto :NextArgument
:GetStarted
if /I "%_ArgTestDeploy%" == "" goto :usage
if /I "%_ArgDestinationType%" == "" goto :usage
set _Destination=%_ArgDestinationType%
if not "%_ArgComputerName%" == "" set _Destination=%_Destination%,computerName='%_ArgComputerName%'
if not "%_ArgUserName%" == "" set _Destination=%_Destination%,userName='%_ArgUserName%'
if not "%_ArgPassword%" == "" set _Destination=%_Destination%,password='%_ArgPassword%'
if not "%_ArgAuthType%" == "" set _Destination=%_Destination%,authtype='%_ArgAuthType%'
if not "%_ArgEncryptPassword%" == "" set _Destination=%_Destination%,encryptPassword='%_ArgEncryptPassword%'
if not "%_ArgIncludeAcls%" == "" set _Destination=%_Destination%,includeAcls='%_ArgIncludeAcls%'
if not "%_ArgtempAgent%" == "" set _Destination=%_Destination%,tempAgent='%_ArgtempAgent%'
@rem ---------------------------------------------------------------------------------
@rem add -whatif when -T is specified
@rem ---------------------------------------------------------------------------------
if /I "%_ArgTestDeploy%" NEQ "false" (
set _MsDeployAdditionalFlags=%_MsDeployAdditionalFlags% -whatif
)
@rem ---------------------------------------------------------------------------------
@rem add flags for IISExpress when -L is specified
@rem ---------------------------------------------------------------------------------
if /I "%_ArgLocalIIS%" == "true" (
call :SetIISExpressArguments
)
if /I "%_ArgLocalIIS%" == "true" (
if not exist "%IISExpressPath%%IISExpressManifest%" (
echo. IISExpress is not found on this machine. Please install through Web Platform Installer before execute the script.
echo. or remove /L flag
echo. Please visit http://go.microsoft.com/?linkid=9278654
goto :usage
)
if not exist "%IISExpressUserProfileDirectory%" (
echo. %IISExpressUserProfileDirectory% is not exists
echo. IISExpress is found on the machine. But the user have run IISExpress at least once.
echo. Please visit http://go.microsoft.com/?linkid=9278654 for detail
goto :usage
)
set _MsDeployAdditionalFlags=%_MsDeployAdditionalFlags% -appHostConfigDir:%IISExpressUserProfileDirectory% -WebServerDir:"%IISExpressPath%" -webServerManifest:"%IISExpressManifest%"
)
@rem ---------------------------------------------------------------------------------
@rem pass through the addition msdeploy.exe Flags
@rem ---------------------------------------------------------------------------------
set _MsDeployAdditionalFlags=%_MsDeployAdditionalFlags% %_ArgMsDeployAdditionalFlags%
@rem ---------------------------------------------------------------------------------
@rem check the existence of the package file
@rem ---------------------------------------------------------------------------------
if not exist "%RootPath%CAREwebNet.zip" (
echo "%RootPath%CAREwebNet.zip" does not exist.
echo This batch file relies on this deploy source file^(s^) in the same folder.
goto :usage
)
@rem ---------------------------------------------------------------------------------
@rem Execute msdeploy.exe command line
@rem ---------------------------------------------------------------------------------
call :CheckParameterFile
echo. Start executing msdeploy.exe
echo -------------------------------------------------------
if not exist "%_DeploySetParametersFile%" (
echo. "%MSDeployPath%\msdeploy.exe" -source:package='%RootPath%CAREwebNet.zip' -dest:%_Destination% -verb:sync -disableLink:AppPoolExtension -disableLink:ContentExtension -disableLink:CertificateExtension %_MsDeployAdditionalFlags%
"%MSDeployPath%\msdeploy.exe" -source:package='%RootPath%CAREwebNet.zip' -dest:%_Destination% -verb:sync -disableLink:AppPoolExtension -disableLink:ContentExtension -disableLink:CertificateExtension %_MsDeployAdditionalFlags%
) else (
echo. "%MSDeployPath%\msdeploy.exe" -source:package='%RootPath%CAREwebNet.zip' -dest:%_Destination% -verb:sync -disableLink:AppPoolExtension -disableLink:ContentExtension -disableLink:CertificateExtension -setParamFile:"%RootPath%CAREwebNet.SetParameters.xml" %_MsDeployAdditionalFlags%
"%MSDeployPath%\msdeploy.exe" -source:package='%RootPath%CAREwebNet.zip' -dest:%_Destination% -verb:sync -disableLink:AppPoolExtension -disableLink:ContentExtension -disableLink:CertificateExtension -setParamFile:"%RootPath%CAREwebNet.SetParameters.xml" %_MsDeployAdditionalFlags%
)
goto :eof
@rem ---------------------------------------------------------------------------------
@rem Find and set IISExpress argument.
@rem ---------------------------------------------------------------------------------
:SetIISExpressArguments
if "%IISExpressPath%" == "" (
for /F "usebackq tokens=1,2,*" %%h in (`reg query "HKLM\SOFTWARE\Microsoft\IISExpress" /s ^| findstr -i "InstallPath"`) do (
if /I "%%h" == "InstallPath" (
if /I "%%i" == "REG_SZ" (
if not "%%j" == "" (
if "%%~dpj" == "%%j" (
set IISExpressPath=%%j
))))))
if "%IISExpressPath%" == "" (
for /F "usebackq tokens=1,2,*" %%h in (`reg query "HKLM\SOFTWARE\Wow6432Node\Microsoft\IISExpress" /s ^| findstr -i "InstallPath"`) do (
if /I "%%h" == "InstallPath" (
if /I "%%i" == "REG_SZ" (
if not "%%j" == "" (
if "%%~dpj" == "%%j" (
set IISExpressPath=%%j
))))))
if "%PersonalDocumentFolder%" == "" (
for /F "usebackq tokens=2*" %%i in (`reg query "HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders" /v Personal`) do (
set PersonalDocumentFolder=%%j
))
if "%IISExpressManifest%" == "" (
for /F "usebackq tokens=1,2,*" %%h in (`reg query "HKLM\SOFTWARE\Microsoft\IISExpress" /s ^| findstr -i "Manifest"`) do (
if /I "%%h" == "Manifest" (
if /I "%%i" == "REG_SZ" (
if not "%%j" == "" (
set IISExpressManifest=%%j
)))))
if "%IISExpressManifest%" == "" (
for /F "usebackq tokens=1,2,*" %%h in (`reg query "HKLM\SOFTWARE\Wow6432Node\Microsoft\IISExpress" /s ^| findstr -i "Manifest"`) do (
if /I "%%h" == "Manifest" (
if /I "%%i" == "REG_SZ" (
if not "%%j" == "" (
set IISExpressManifest=%%j
)))))
set IISExpressUserProfileDirectory="%PersonalDocumentFolder%\IISExpress\config"
goto :eof
@rem ---------------------------------------------------------------------------------
@rem CheckParameterFile -- check if the package's setparamters.xml exists or not
@rem ---------------------------------------------------------------------------------
:CheckParameterFile
echo =========================================================
if exist "%_DeploySetParametersFile%" (
echo SetParameters from:
echo "%_DeploySetParametersFile%"
echo You can change IIS Application Name, Physical path, connectionString
echo or other deploy parameters in the above file.
) else (
echo SetParamterFiles does not exist in package location.
echo Use package embedded defaultValue to deploy.
)
echo -------------------------------------------------------
goto :eof
@rem ---------------------------------------------------------------------------------
@rem Usage
@rem ---------------------------------------------------------------------------------
:usage
echo =========================================================
if not exist "%RootPath%CAREwebNet.deploy-readme.txt" (
echo Usage:%~nx0 [/T^|/Y] [/M:ComputerName] [/U:userName] [/P:password] [/G:tempAgent] [additional msdeploy flags ...]
echo Required flags:
echo /T Calls msdeploy.exe with the "-whatif" flag, which simulates deployment.
echo /Y Calls msdeploy.exe without the "-whatif" flag, which deploys the package to the current machine or destination server
echo Optional flags:
echo. By Default, this script deploy to the current machine where this script is invoked which will use current user credential without tempAgent.
echo. Only pass these arguments when in advance scenario.
echo /M: Msdeploy destination name of remote computer or proxy-URL. Default is local.
echo /U: Msdeploy destination user name.
echo /P: Msdeploy destination password.
echo /G: Msdeploy destination tempAgent. True or False. Default is false.
echo /A: specifies the type of authentication to be used. The possible values are NTLM and Basic. If the wmsvc provider setting is specified, the default authentication type is Basic
otherwise, the default authentication type is NTLM.
echo /L: Deploy to Local IISExpress User Instance.
echo.[additional msdeploy flags]: note: " is required for passing = through command line.
echo "-skip:objectName=setAcl" "-skip:objectName=dbFullSql"
echo.Alternative environment variable _MsDeployAdditionalFlags is also honored.
echo.
echo. Please make sure MSDeploy is installed in the box http://go.microsoft.com/?linkid=9278654
echo.
echo In addition, you can change IIS Application Name, Physical path,
echo connectionString and other deploy parameters in the following file:
echo "%_DeploySetParametersFile%"
echo.
echo For more information about this batch file, visit http://go.microsoft.com/fwlink/?LinkID=183544
) else (
start notepad "%RootPath%CAREwebNet.deploy-readme.txt"
)
echo =========================================================
goto :eof
我也驗證了語法... http://technet.microsoft.com/en-us/library/dd569089(v=ws.10).aspx ...但我仍然沒有任何運氣。
[項目] .deploy.cmd文件生成的，當我們構建服務器上建得是失敗。將C：\ Program Files（x86）\ MSBuild \ Microsoft \ VisualStudio \ v10.0 \ Web中的Microsoft.Web.Publishing.targets文件替換爲此處的一個：https：//gist.github。com/codeprogression/1065028解決了這個問題 - 謝謝！ – KevD