爲什麼我綜合時沒有看到輸出？

Question

我一直在實驗室的作業，幾乎是完整的，但我遇到了一個問題，我合成時我沒有看到的輸出。我有7塊，單獨測試時顯示正確的輸出。在使用頂級模塊和測試平臺文件時，我怎麼會得不到任何輸出？以下是我的頂級模塊，其次是我的測試臺，因爲我懷疑問題可能在那裏。我已經看過它，不能指出我可能做錯的任何事情。任何幫助，將不勝感激。

library IEEE; 
use IEEE.STD_LOGIC_1164.ALL; 

entity top_module is port(
    x,y : in std_logic_vector(7 downto 0); 
    opcode : in std_logic_vector(2 downto 0); 
    z : out std_logic_vector(7 downto 0) 
    ); 
end top_module; 

architecture behavior of top_module is 

signal bwAnd, bwOr, bwXor, add, subtract, bwComplement, mux_in1, mux_in2, mux_in3, mux_in4, mux_in5, mux_in6 : std_logic_vector(7 downto 0); 


component BW_And is port(
    x,y : in std_logic_vector(7 downto 0); 
    z1 : out std_logic_vector(7 downto 0) 
    ); 
end component; 

component BW_Rr is port(
    x,y : in std_logic_vector(7 downto 0); 
    z2 : out std_logic_vector(7 downto 0) 
    ); 
end component; 

component BW_Xor is port(
    x,y : in std_logic_vector(7 downto 0); 
    z3 : out std_logic_vector(7 downto 0) 
    ); 
end component; 

component full_adder_8 is port(
    x,y : in std_logic_vector(7 downto 0); 
    cin : in std_logic_vector(7 downto 0) := "00000000"; 
    sum, cout: out std_logic_vector(7 downto 0) 
    ); 
end component; 

component full_subtractor_8 is port(
    x,y : in std_logic_vector(7 downto 0); 
    cin : in std_logic_vector(7 downto 0) := "11111111"; 
difference, cout: out std_logic_vector(7 downto 0) 
    ); 
end component; 

component Complement is port(
    x : in std_logic_vector(7 downto 0); 
    z4 : out std_logic_vector(7 downto 0) 
    ); 
end component; 

component mux is port(
    z1,z2,z3,sum,difference,z4 : in std_logic_vector(7 downto 0); 
    opcode : in std_logic_vector(2 downto 0); 
    mux_out : out std_logic_vector(7 downto 0) 
    ); 
end component; 

begin 

--instantiating components and mapping ports 

c0: BW_And port map(x => x, y => y, z1 => bwAnd); 

c1: BW_Or port map(x => x, y => y, z2 => bwOr); 

c2: BW_Xor port map(x => x, y => y, z3 => bwXor); 

c3: full_adder_8 port map(x => x, y => y, sum => add); 

c4: full_subtractor_8 port map(x => x, y => y, difference => subtract); 

c5: Complement port map(x => x, z4 => bwComplement); 

c6: mux port map(z1 => mux_in1, z2 => mux_in2, z3 => mux_in3, sum => mux_in4, difference => mux_in5, z4 =>mux_in6, opcode => opcode, mux_out => z); 

end behavior; 

試驗檯：

library IEEE; 
use IEEE.STD_LOGIC_1164.ALL; 

entity Lab4 is 
end Lab4; 

architecture behavior of Lab4 is 

component top_module is port(
    x,y : in std_logic_vector(7 downto 0); 
    opcode : in std_logic_vector(2 downto 0); 
    z : out std_logic_vector(7 downto 0) 
    ); 
end component; 

signal test_x : std_logic_vector(7 downto 0); 
signal test_y : std_logic_vector(7 downto 0); 
signal test_opcode : std_logic_vector(2 downto 0) := "000"; 
signal test_z : std_logic_vector(7 downto 0); 

begin 

    uut: top_module port map (x => test_x, y => test_y, opcode => test_opcode, z => test_z); 

sim_proc : process 
begin 

    test_x <= "00010100"; test_y <= "11001111"; test_opcode <= "000"; 
    wait for 100 ns; 
    test_x <= "00010100"; test_y <= "11001111"; test_opcode <= "001"; 
    wait for 100 ns; 
    test_x <= "00010100"; test_y <= "11001111"; test_opcode <= "010"; 
    wait for 100 ns; 
    test_x <= "00010100"; test_y <= "11001111"; test_opcode <= "011"; 
    wait for 100 ns; 
    test_x <= "00010100"; test_y <= "11001111"; test_opcode <= "100"; 
    wait for 100 ns; 
    test_x <= "00010100"; test_y <= "11001111"; test_opcode <= "101"; 

end process; 
end behavior; 

實體爲每個組件：

entity BW_And is port(
    x,y : in std_logic_vector(7 downto 0); 
    z1 : out std_logic_vector(7 downto 0) 
    ); 
end BW_And; 

entity BW_Or is port(
    x,y : in std_logic_vector(7 downto 0); 
    z2 : out std_logic_vector(7 downto 0) 
    ); 
end BW_Or; 

entity BW_Xor is port(
    x,y : in std_logic_vector(7 downto 0); 
    z3 : out std_logic_vector(7 downto 0) 
    ); 
end BW_Xor; 

entity full_adder_8 is port(
    x,y : in std_logic_vector(7 downto 0); 
    cin : in std_logic_vector(7 downto 0) := "00000000"; 
    sum, cout: out std_logic_vector(7 downto 0) 
    ); 
end full_adder_8; 

entity full_subtractor_8 is port(
    x,y : in std_logic_vector(7 downto 0); 
    cin : in std_logic_vector(7 downto 0) := "11111111"; 
    difference, cout: out std_logic_vector(7 downto 0) 
    ); 
end full_subtractor_8; 

entity Complement is port(
    x : in std_logic_vector(7 downto 0); 
    z4 : out std_logic_vector(7 downto 0) 
    ); 
end Complement; 

entity mux is port(
    z1,z2,z3,sum,difference,z4 : in std_logic_vector(7 downto 0); 
    opcode : in std_logic_vector(2 downto 0); 
    mux_out : out std_logic_vector(7 downto 0) 
    ); 
end mux; 

Answer 1

我意識到在我的問題是畢竟。問題出在我的mux文件上。在我的過程中，我只通過了「操作碼」而忽略了所有的輸入。

前：

process (opcode) 
    . 
    . 
    . 
end process; 

後：

process (z1,z2,z3,sum,difference,z4,opcode) 
    . 
    . 
    . 
end process;